neoSCAPES

Designer privacy panels

neoSCAPES hanging privacy panels are available in a collection of modern designs, which can be customised based on your project's requirements. The panel is available in various thicknesses, so you can fine tune the level of privacy. Installation can be made using included architectural hanging hardware or optional sliding tracks

SPECIFICATIONS
  • Class 1 fire rating UL-S.102

  • Overall thickness: 18mm / 27mm

  • Dimensions : up to  47'' x 94''

  • Lead time: Made to order, lead times vary

  • VOC free, no chemical irritants or harmful substances

  • Made from up to 80% of recycled materials

  • PET felt and acoustic laminate is 100% recyclable

 

CORNER OPTIONS
Square corners (default)
Round corners (optional)
CONFIGURATIONS
9mm single panel (seethrough)
18mm dual panel (seethrough)
27mm dual tone panel
A semi-rigid 9mm felt panel with cut pattern that allows to see through.
Double felt laminate with cut pattern that allows to see through. Can be customised with a different panel color on each side.
Triple felt laminate with cut pattern on each side and solid color on the interior panel. Can be customised with a different color on each side.
HARDWARE & INSTALLATION
Architectural hanging cables
Architectural hanging cables can be used to hang the panels from the ceiling (TYPE 1) as well as anchor them to the floor (TYPE 2).
TYPE 1
TYPE 2
Ceiling tracks (sliding panels)
Architectural hanging cables can be used to hang the panels from the ceiling (TYPE 1) as well as anchor them to the floor (TYPE 2).
Single track
Double track
Double track overlap system
MODELS / PATTERNS
CLEANING AND MAINTENANCE

Regular maintenance

Protect from direct heat and sunlight.

To prevent dust build up, lightly dust with a soft cloth or vacuum with a soft brush attachment.

Please Note

 

neoSCAPES panels should be removed to ensure they can be cleaned safely.

 

It is recommended that spot cleaning only is used and that it is carried out by a professional cleaner.

 

Spot Cleaning

 

Professional cleaning is always recommended.

Always test any cleaning products on an inconspicuous area prior to commencing cleaning.

Blot any excess spills from the material with a dry clean sponge or cloth.

Treat all stains and spills as soon as possible.

Most marks can be spot cleaned by lightly wetting the affected area with a mild detergent and warm water

solution.

Do not saturate the panel.

Do not scrub or abrade the panel as this will affect the surface finish.

Once the stain or mark has been loosened then blot the excess solution out with a dry clean cloth.

Sponge afterwards with clean warm water and mop any excess moisture with a dry clean sponge or cloth.

The surface can also be spot cleaned with dry cleaning fluid. Lightly sponge a small amount of dry cleaning fluid

and blot.

Dry away from direct heat and sunlight.

Avoid the use of carpet shampoos.