neoFLEX

LAMES ACOUSTIQUES MODULAIRES

 
 
Les ensembles de lames acoustiques modulaires neoFLEX permettent au son de passer entre les lames acoustiques verticales et être absorbées par une des deux surfaces exposées. Conviennent à une multitude d'espaces, notamment au dessus des espaces de travail et des aires bruyantes, dans les aires ouvertes, corridors, salles de conférence ou tout autre espace nécessitant une atténuation des niveaux de bruit.
 
MODULE INDIVIDUEL
cadre modulaire
- disponible en noir ou blanc
- attaches inclues
lame acoustique neoFLEX
cable architectural
INSTALLATION CONTINUE

  • Class 1 fire rating UL-S.102

  • Constructed with aluminum frame for maximum durability

  • Overall thickness: 12mm / 18mm / 24mm

  • Baffle height: 4'' / 6'' / 8'' / 10'' / 12'' / 16"

  • Lead time: Made to order, lead times vary

  • Installs hanging from the ceiling using 2mm architectural steel cables

  • VOC free, no chemical irritants, free of harmful substances

  • ÜNO felt and acoustic laminate are 100% recyclable

  • 4''

  • 6''

  • 8''

  • 10''

  • 12''

  • 16"

Available in a variety of sizes and can be customised to fit any space.
CONSTRUCTION
Architectural cable
Lightweight frame
48" - 120'' (1220mm - 1830mm)
STANDARD MOUNTING FRAMES
1010 series frame
28" - 72'' (710mm - 1830mm)
Frame width
Baffle width
36" - 96'' (900mm - 2440mm)
Frame lenght
CLEANING AND MAINTENANCE
 

Regular maintenance

Protect from direct heat and sunlight.

To prevent dust build up, lightly dust with a soft cloth or vacuum with a soft brush attachment.

Please Note

 

neoLEVL baffles should be removed from the ceiling to ensure they can be cleaned safely.

 

It is recommended that spot cleaning only is used and that it is carried out by a professional cleaner.

 

Spot Cleaning

 

Professional cleaning is always recommended.

Always test any cleaning products on an inconspicuous area prior to commencing cleaning.

Blot any excess spills from the material with a dry clean sponge or cloth.

Treat all stains and spills as soon as possible.

Most marks can be spot cleaned by lightly wetting the affected area with a mild detergent and warm water

solution.

Do not saturate the panel.

Do not scrub or abrade the panel as this will affect the surface finish.

Once the stain or mark has been loosened then blot the excess solution out with a dry clean cloth.

Sponge afterwards with clean warm water and mop any excess moisture with a dry clean sponge or cloth.

The surface can also be spot cleaned with dry cleaning fluid. Lightly sponge a small amount of dry cleaning fluid

and blot.

Dry away from direct heat and sunlight.

Avoid the use of carpet shampoos.

2360 46e Avenue, Lachine, Qc, H8T 2P3

T: 1.888.353.7599 | 1.514.633.6898

RBQ: 57422636

© Montréal Acoustique 2020. Tous les droits réservés.Toutes les marques de tiers sont la propriété de la compagnie respective.

1220fb_d1678e617f1642e6b8fd8649432867492